Boston Plumbing and Heating Blog

Homeowners need plumbing that works. Unfortunately the drains get clogged and the toilet backs up. Regularly, we come across plumbing problems that are caused by homeowners. Here are some things that ruin your plumbing.

Pouring grease down the kitchen drain.

If you’re in the habit of pouring bacon grease down the kitchen-sink drain, you might as well call the plumber now. Grease is one of the best things for clogging drains.

Putting everything down the kitchen drain.
 
Don’t put everything down the garbage disposal.  You should especially avoid putting flour, rice, potato peels (and some other peels) and many fibrous foods such as asparagus and chard down the garbage disposal.

Using the toilet as a trash can.  

If it isn’t waste or toilet paper, don’t flush it. The toilet should not be used as a trash can. The toilet has a 3-inch drain pipe that leads into another drain pipe, which is THE drain pipe to your entire house. In other words, flushing one improper item down the toilet ultimately can stop up everything in the house.

Leaving hoses connected during winter.

This is a classic plumbing error. Hoses can cause damage when left out all year: they can lead to freezing of the outdoor faucet or its water supply pipe. It’s also very bad for your hose.

Using too much drain cleaner.

When used judiciously and on the right kind of clog, drain cleaners can be effective and relatively safe for drains. When used with abandon, they can corrode some drain materials, and they can actually make clogged drains worse.

Pouring chemicals into a septic system.

If you’re used to living with private septic, you probably know how to take care of it. But if you just bought a house with septic, you might not think twice about using chemicals like drain cleaner, chlorine bleach, paint and even anti-bacterial soaps. These chemicals kill the essential waste-eating bacteria in the septic tank.

Nailing or cutting into a wall with hidden plumbing pipes.

Know where you are nailing, screwing or sawing into a wall. You don’t want to hit the pipes.  

Joining two different metals in piping.

When you hire a plumber, make sure they know what they are doing. When dissimilar metals, such as copper and steel, are touching, a process called galvanic action leads to corrosion. Corrosion leads to leaks. Such joints must be made with a dielectric union or other approved fitting. Be sure you plumber is using the right type of metal pipes.

For your plumbing problems in Wellesley, contact Greater Boston Plumbing.

Networx.com

Homeowners who are looking to spend less on energy bills this summer will find a solution by ensuring the proper installation and service of their home air conditioning.

It is estimated that nearly half of all heating and cooling equipment in U.S. homes never performs to its advertised capacity and efficiency due to incorrect installation, which means homeowners pay higher operating costs over the life of the equipment. Older heating and cooling systems waste energy, create a bigger carbon footprint, and ultimately cost you more money.
 
Fortunately, North American Technician Excellence (NATE), the nation's largest industry-endorsed, certification organization for heating, ventilation, air conditioning technicians, recommends some steps you can take to maximize your home's efficiency while also being environmentally friendly.

• Look at your current energy bills to identify inefficiencies. Or call a plumber help you decide if your current system should be replaced.
• Purchase ENERGY STAR air conditioners. High-efficiency systems reduce your impact on the environment and can also save you money. You may also be eligible for a Federal Tax Credit.
• Compare the SEER or AFUE of your cooling or heating system with newer models. If it's below 13, you may want to consider a new, more efficient system. Remember, the higher the rating, the less wasted energy and reduced carbon footprint. Use our energy savings calculator to help determine the efficiency of your current cooling or heating system as compared to a more efficient HVAC system.
• Look into geothermal heating systems. By using the earth's natural heat, these systems are among the most efficient and energy-conserving heating and cooling technologies currently available.
• Change your air filters monthly.
• Ceiling fans can help delay or reduce the need for air conditioning.
• Plant more trees on your property. By doing so, the shade it gives off will make your home feel cooler in the warmer months. In addition to climate control, trees also improve air quality.
• Install a programmable thermostat to keep temperatures regulated all year long.
• Make sure your home is properly insulated--drafty windows and doors waste energy.
• Have your AC system serviced regularly for optimal performance by an HVAC professional.

For AC service or installation in Boston and Worcester, contact Greater Boston Plumbing.

WSJ

Right now is the right time for preventative maintenance on your central air conditioning system.  Air conditioning condensing units that are on the ground or roof need to be cleaned.

The cost is minimal to have your AC unit inspected annually. The cost of not having it serviced or inspected could be too much. If you wait to have your AC serviced when it’s hot and you need it you may be in for a surprise and for some heat! Once the weather turns hot, too many people need service. If you have an issue with your air conditioning, you could end up spending a few days sweating and waiting for service.
 
To ensure that your AC is running efficiently and effectively, you should replace your air filter monthly as well. A dirty air filter will restrict the airflow, and the performance causing your electric bill to go up and your system to work too hard.  

To keep your home cooler and your energy costs down, you should also close the blinds or curtains to keep out the sun. Believe it or not, this will lower the temperature in your home by a few degrees. Additionally, installing a programmable thermostat, or keeping your thermostat above 78 will also keep your costs down. Every degree lower than 78 degrees adds 5% to your energy costs in summer.  

Long term investments, like replacing an old air conditioning unit, one that is older than 10 or even 20 years will save you money.

For more information on service and maintenance of your home air conditioning in Boston and Worcester, contact Greater Boston Plumbing.

As the economy improves in Boston and Worcester, many homeowners are choosing to begin home improvements.  But when it comes to choosing how to approach your home improvement projects, consider how to make green home improvements.
 
Sustainable home improvements help reduce utility costs, they also make a house more appealing to potential buyers.

Did you know that new home buyers will offer 10% more for homes that are certified green? Return on investment for certain types of green improvements tends to be high, meaning sellers will get back much of the cost of the home improvement project when they sell the home. ROI should be the biggest factor in deciding what home improvement project to address first.

If you’re looking for eco-friendly home improvements:

Switch to a solar water heater – Switching to solar power for heating water can be a huge energy and money-saver. Solar hot water systems rely on free energy from the sun to heat a home’s hot water. A typical system can use 50% to 80% less energy than traditional heating systems. That reduction can help a typical household trim its annual energy costs by 10% to 15%.

Replace an old HVAC system – In the typical home, up to half of total energy consumption goes to heat and cool the house. Replacing old, inefficient air conditioning, heating and ventilation systems with newer, more efficient models can dramatically reduce a home’s heating and cooling costs.

For more information, contact Greater Boston Plumbing and Heating.

Excerpts Clarksville Times

Water conservation has become essential as we see watering bans pop up each year. Even in areas where there seem to be no water issues, we see water bills rise higher and higher. But saving water not only saves money on your utility bill, it also helps prevent water pollution in area beaches, lakes and rivers.

Many homes in towns around Boston and Worcester have private septic. Conserving water can help your septic system last longer by reducing soil saturation. For homes on city sewer, overloading city sewer systems allows untreated sewage to flow into lakes and rivers. How many times around Boston have you looked for the blue or red beach flag in the summer? The less water flowing through these city systems, the lower the likelihood of water pollution.

Homeowners can conserve water and lower their water bills merely by calling the plumber.

Fixing a leaking faucet or drain can lower your water bill. A small drip from a leaking faucet can waste 20 gallons of water a day and larger leaks can waste hundreds of gallons. Hiring a plumber for a typical repair can cost more than four times what it would cost to do it on your own. Even if you are handy around the house, consider hiring a professional plumber if you’re unsure because damaging your pipes can do even more damage to your finances than a leaking faucet. Homeowners should call a plumber if there are leaky faucets or drains in their home.

Leaking toilets can cost you even more money, in fact, a leaky toilet can waste up to 52,800 gallons a year. But, you can check your toilet for leaks too.  Put a few drops of food coloring in your toilet tank. If the color shows up in the bowl, without flushing, within 30 minutes, you have a leak that should be repaired immediately.

Another way to check for water leaks in your home is to read your water meter. Read the meter, wait a couple hours without using any water. If the meter isn’t exactly the same, there is a water leak, call the plumber.

If you want your leaking faucets and toilets fixed, contact Greater Boston Plumbing and Heating.